Kalo xde AP.. harga Lancer GT lebih kurang harga WAJA je
MITSUBISHI LANCER EVOLUTION I
The Evolution I was introduced in 1992 to compete in the World Rally Championship. It used the 2.0 L turbocharged DOHC engine and 4WD drivetrain from the original Galant VR-4 in a Lancer chassis, and was sold in GSR and RS models. The latter was a stripped-down club racing version that lacked power windows and seats, anti-lock brakes, a rear wiper, and had steel wheels to save approximately 155 lb (70 kg) less than the 2730 lb (1238 kg) GSR, while the former came with all of the conveniences of a typical street car. It came with Mitsubishi’s 4G63 engine producing 250 PS (244 hp/182 kW) at 6000 rpm and 228 ft·lbf (309 N·m) at 3000 rpm, along with all wheel drive which would become a trademark on all Evolution models. 5,000 Evolution Is were sold between 1992 and 1993.
Production
October 1992–January 1994
Platform CD9A
Wheelbase
2500 mm (98.4 in)
Length
4310 mm (169.7 in)
Width
1695 mm (66.7 in)
Height
1395 mm (54.9 in)
Curb weight
1170 kg (2579 lb)–1240 kg (2734 lb)
MITSUBISHI LANCER EVOLUTION II
The successful Evolution I was changed in December of 1993, and was produced until 1995. It consisted mainly of handling improvements, including minor wheelbase adjustments, larger swaybars, bodywork tweaks including a larger spoiler, and beefier tires. Power output was increased to 256 PS (252 hp/188 kW) from the same engine and torque was unchanged for both GSR and RS models.
Production
January 1994–August 1995
Platform
CE9A
Wheelbase
2510 mm (98.8 in)
Length
4310 mm (169.7 in)
Width
1695 mm (66.7 in)
Height
1420 mm (55.9 in)
Curb weight
1180 kg (2601 lb)–1250 kg (2756 lb)
MITSUBISHI LANCER EVOLUTION III
January 1995 saw the arrival of the Evolution 3- and this time the 5000 strong production run was bought up more quickly than the Evolution 2. The Evolution 3 looked more serious, with its new nose moulding (to channel air better to the radiator, intercooler, and brakes). New side skirts and rear corners, while the rear wing had grown again to reduce lift. Under the vented aluminium bonnet a new TDO5-16G6-7 Turbo, new exhaust system and increased compression brought another 10 PS (10 hp/7 kW) power rise, Torque output was unaltered, apart from a higher final drive ratio. Both GSR and RS still used the same 5 speed gearbox. Interior tweaks were limited to a new Momo steering wheel (GSR only) and new fabric on the Evolution 2 type Recaros. The specs on this vehicle were an engine 4G63T size of 1997 cc, 270 bhp (201 kW) at 6250 rpm, torque was 228 ft·lbf (309 N·m) at 3000 rpm, weight is 1260 kg (RS 1190 kg). A top speed of 149 mph (240 km/h) and 0-60 mi/h in 4.9 s. The formidable CE9A Evo III was also featured in the Manga series Initial D.
Production
August 1995–August 1996
Platform
CE9A
Wheelbase
2510 mm (98.8 in)
Length
4310 mm (169.7 in)
Width
1695 mm (66.7 in)
Height
1420 mm (55.9 in)
Curb weight
1260 kg (RS 1190 kg)
MITSUBISHI LANCER EVOLUTION IV
The Lancer platform was completely changed in 1996, and along with it the Evolution, which had become extremely popular throughout the world. The engine and transaxle was rotated 180° to better balance the weight and eliminate torque steer. There were 2 versions available, The RS and GSR. The RS version was produced as a competition car with a limited-slip front differential and a friction type LSD at the rear. It also came with GLX seats and 16″ steel wheels as these were items that would be replaced by anyone entering the car into competition events. The RS also had wind up windows, no air conditioning, and a few extra brace bars to strengthen the chassis, one behind the front grill and the other across the boot floor. The RS also had a factory option of thinner body panels and thinner glass. The GSR and the RS shared a new twin scroll turbocharger which helped to increase power to 280 PS (276 hp/206 kW) at 6500 rpm and 260 ft·lbf (352 N·m) of torque at 3000 rpm. Mitsubishi’s new Active yaw control appeared as a factory option on the GSR model, which used steering, throttle input sensors and g sensors to computer-hydraulica
Production
August 1996–January 1998
Platform
CN9A
Wheelbase
2510 mm (98.8 in)
Length
4330 mm (170.5 in)
Width
1690 mm (66.5 in)
Height
1415 mm (55.7 in)
Curb weight
1260 kg (2778 lb)–1350 kg (2976 lb)
.
MITSUBISHI LANCER EVOLUTION V
In 2004, the WRC created a new “World Rally Car” class, and while these cars still had to abide by Group A standards, they did not have to meet homologation rules. Mitsubishi redesigned the Evolution IV with this in mind and introduced the Evolution V in January of 1998.
Many aspects of the car were changed such as: The interior was upgraded in the GSR version with a better class of Recaro seat. The body kit had flared arches at the front and rear and a new aluminium rear spoiler replaced the IV FRP version and gave an adjustable angle of attack to alter rear down force. The track was widened by 10 mm (0.4 in), the wheel offset changed from ET45 to ET38 along with the wheel diameter which rose from 16″ to 17″ to accommodate Brembo brakes which were added to enhance braking. In addition the brake master cylinder bore increased by 0.3 millimetres (0.01 in). The engine was strengthened in a few areas and the cam duration was increased. The pistons were lighter with a smaller skirt area. 510 cc injectors were replaced with 560 cc injectors for better engine reliability due to more electrical “headroom” and the ecu was changed to include a flash
Further more, the turbocharger was again improved. Torque was increased to 275 ft·lbf (373 N·m) at 3000 rpm. Power officially stayed the same, at 280 PS (276 hp/206 kW) as agreed by
Production
January 1998–January 1999
Platform
CP9A
Wheelbase
2510 mm (98.8 in)
Length
4350 mm (171.3 in)
Width
1770 mm (69.7 in)
Height
1405 mm (55.3 in)–1415 mm (55.7 in)
Curb weight
1260 kg (2778 lb)–1360 kg (2998 lb)
MITSUBISHI LANCER EVOLUTION VI
The Evolution VI’s changes mainly focused on cooling and engine durability. It received a larger intercooler, larger oil cooler, and new pistons, along with a titanium-aluminide turbine wheel for the RS model, which was a first in a production car. Also, the Evolution VI received new bodywork yet again, with the most easily spotted change in the front bumper where the huge foglights were reduced in size and moved to the corners for better airflow. A new model was added to the GSR and RS lineup; known as the RS2, it was an RS with a few of the GSR’s options. Another limited-edition RS was known as the RS Sprint, an RS tuned by Ralliart in the
Yet another special edition Evolution VI was also released in 1999: the Tommi Makinen edition, named after Finnish rally driver Tommi Makinen that had won Mitsubishi four WRC drivers championships. It featured a different front bumper, Red/Black Recaro seats (with embossed T. Makinen logo), 17″ ENKEI white wheels, a leather MOMO steering wheel and shift knob, a titanium turbine that spooled up quicker, front upper strut brace, lowered with tarmac stages in mind, a quicker lock to lock and amongst other colours, came in an exclusive shade of red with special decals, replicating Tommi Makinen’s rally car’s colour scheme. This car is also sometimes referred to as an Evolution 6½ or Evolution 6.5.
Production
January 1999–March 2001
Platform
CP9A
Wheelbase
2510 mm (98.8 in)
Length
4350 mm (171.3 in)
Width
1770 mm (69.7 in)
Height
1405 mm (55.3 in)–1415 mm (55.7 in)
Curb weight
1250 kg (2756 lb)–1360 kg (2998 lb)
MITSUBISHI LANCER EVOLUTION VII
In 2001, Mitsubishi were forced by the FIA to race in the WRC using WRC rules for building a car instead of the Group A class rules, and thus did not need to follow homologation rules. The Evolution VII was based on the larger Lancer Cedia platform and as a result gained more weight over the Evolution VI, but Mitsubishi made up for this with multiple important chassis tweaks. The biggest change was the addition of an active center differential and a more effective limited-slip differential, while a front helical limited-slip differential was added. Torque was increased again to 284 ft·lbf (385 N·m) with engine tweaks that allowed greater airflow, and horsepower officially remained at 280 PS (276 hp/206 kW). Despite its civilian appearance, the Evolution VII can outrun many more expensive cars (such as the Ferrari 360 Modena, as seen in Best Motoring videos.)
The introduction of the Evolution VII also marked the first time an automatic drivetrain was included within the model lineup—the GT-A. Seen as the ‘gentleman’s express’ version of the visually similar VII GSR, the GT-A model had the following distinguishing interior and exterior specification ; GT-A only diamond cut finish 17 inch alloy wheels, clear rear light lenses and all in one style front headlights (later used on the Evolution VIII). The GT-A had the option of either no spoiler, the short spoiler (as later used on the Evolution VIII 260) or the thunderspoiler as used on the standard Evolution VII models. The most distinquishing feature was a smooth bonnet with no air-grills on it at all. Although offering inferior cooling capabilities, the bonnet was designed to give a cleaner line through the air with less air resistance at motorway speeds.
Interior could be specified with factory options of a deluxe velour interior, full leather or the Recaro sports seats. The GT-A interior was different in that it had chrome door handles, a different instrument panel (to show the gear selection) and chrome edged bezels around the speedo and rev counter. The GT-A also had additional sound deadening installed from the factory and the engine manifold and downpipe had been engineered to be quieter.
The 5-speed automatic gearbox had what Mitsubishi called ‘fuzzy logic’, which meant that the car would learn what the driver’s driving characteristics were like and would adapt the gear change timings and kick down reactions accordingly. The gears could be manually selected as with most tiptronics via steering wheel + and - buttons (a pair both sides) or via selecting the tiptronic gate with the gear lever. Power was down a little from the standard manual cars with a very usable 272 bhp (203 kW). The GT-A gearbox did not appear again in the Evolution VIII but has been installed in the estate version of the Evolution IX Wagon
Production
March 2001–January 2003
Platform
CT9A
Wheelbase
2625 mm (103.3 in)
Length
4455 mm (175.4 in)
Width
1770 mm (69.7 in)
Height
1450 mm (57.1 in)
Curb weight
1320 kg (2910 lb)–1480 kg (3263 lb)
MITSUBISHI LANCER EVOLUTION VIII
The Evolution was changed again in 2003, this time sporting Super Active Yaw Control to handle traction and a 6-speed manual gearbox. It was available with 280 PS (276 hp/206 kW) in three trims: standard (GSR in
The Lancer Evolution VIII MR uses slick-response Bilstein shocks for improved handling. The aluminium roof panel and other reductions in body weight have lowered the centre of gravity to realize more natural roll characteristics. Detail improvements have also been made to Mitsubishi’s own electronic all-wheel drive, to the ACD 5 + Super AYC 6 traction control and to the Sports ABS systems. The Lancer Evolution VIII displayed at the 2003 Tokyo Motor Show took the MR designation traditionally reserved for Mitsubishi Motors high-performance models and used first on the Galant GTO. Other parts on the MR include BBS alloy wheels, Bilstein shocks, and an aluminium roof. In the
The FQ400, sold through Ralliart UK, produces 302.13 kW (405.2 hp), from its 2.0 L 4G63 engine as the result of being specially modified by United Kingdom tuning firms Rampage, Owen Developments and Flow Race Engines. At 202.9 hp (151.3 kW) per litre, it has one of the highest specific output per litre of any roadcar engine. With a curb weight of around 3200 lb (1450 kg), it achieves a 0-60 mi/h in 3.5 seconds and a 0-100 mi/h in around 9 seconds , top speed is 174 mi/h (280km/h), while costing about £47,000. BBC’s television series Top Gear demonstrated that the FQ-400 could surprisingly keep up with and eventually overtake a Lamborghini Murcielago around a test track. The Stig recorded a Top Gear Power Lap Times of 1 minute 24.8 seconds. In a similar test conducted by UK supercar magazine evo, the Evolution was able to lap the Bedford Autodrome faster than an Audi RS4 and a Porsche Carrera 4S.The Lancer Evolution VIII was also the first Evolution to be sold in the United States, spurred by the success of the Subaru Impreza WRX which had been released there just three years prior. The Evolution VIII found its true competition in the Subaru Impreza WRX STI model the same year as the Evolution VIII’s
Most Evolution VIIIs have a carbon fiber rear spoiler with matching body-color endplates. All Evos have lightweight aluminum front fenders and hood. MR and RS editions have an aluminum roof. Additionally, MR Editions come equipped with 6-speed transmission, bilstein shocks, and factory optional BBS wheels.
The basic RS Edition does not come with power windows or locks, or a radio. It DOES however, despite preproduction info, come standard with A/C in all USDM models.
Production
January 2003–March 2005
Platform
CT9A
Wheelbase
2625 mm (103.3 in)
Length
4490–4535 mm (176.8–178.5 in)
Width
1770 mm (69.7 in)
Height
1450 mm (57.1 in)
Curb weight
1320 kg (2910 lb)–1410 kg (3109 lb)
MITSUBISHI LANCER EVOLUTION IX
Mitsubishi introduced the Lancer Evolution IX in
The USDM Lancer Evolution IX models (RS, SE, MR) vary in their performance capabilities. Subtleties unique to each model account for variations in acceleration, handling and top speed. The RS excludes options standard on the IX & MR (power windows and locks, rear wiper, rear spoilers, trunk interior and trunk insulation). These weight savings of over 60 lb (27 kg) give the RS a subtly sharper handling responsiveness that helps it shave fractions of a second off the lap times of the IX on an identical course. However, the top-end MR does not lose significant performance, as the MR’s 6th forward gear allows it to reach 165 mph (266 km/h) at 7,000 rpm compared to 157 mph (253 km/h) at 7,000 rpm in 5th for the RS and middle-positioned IX models. (Note: Data relevant to
The IX MR retains the features of the Evolution VIII MR like Bilstein shocks, a 6-speed manual transmission, a rooftop vortex generator, BBS forged wheels, HID xenon headlights, foglights, accessory gauge package, “zero lift” kit, special badging and an aluminum roof. All models still sport Recaro bucket seats, Brembo brakes and MOMO steering wheels. Additional revisions from 2005 include a closer gear ratio for the 5-speed transmission, new lighter Enkei wheels on non-MR models, a redesigned front end with a more efficient air dam (the most noticeable feature are the two small oval ducts to cool the intercooler pipes), and a new rear bumper with a diffuser undersurface to smooth out the airflow coming out of the car for non-US models. In an effort to reduce the price increase on the Evolution IX model,HID headlights are no longer standard on the base IX (nor on the 2005 VIII neither), and are available only in the SSL package (Sun, Sound, and Leather), SE (Special Edition) and MR trims.
Three trims are available for
RS - revised 5-speed, aluminium roof, gauge pack, minimal interior, LSD and a titanium-magnesium turbine, left-hand drive option available
GT - revised 5-speed, this is basically the RS mechanically, but with some of the GSR’s features (mainly interior pieces).
GSR - 6-speed, Bilstein monotube shocks, aluminium roof, gauge pack, SAYC (Super Active Yaw Control), and double-din radio (this is roughly equivalent to the USDM MR)
In the
FQ-300, 320, 340 - 6-speed, Bilstein monotube shocks, AYC (Active Yaw Control), super unleaded petrol only
FQ-360 - 6-speed, Bilstein monotube shocks, AYC (Active Yaw Control), Ralliart Sports Meter Kit, carbon front splitter, Speedline alloy wheels, super unleaded petrol only
All four models are available in the
Standard - revised 5-speed, standard model
RS - revised 5-speed, aluminum roof, gauge pack, minimal interior
SE - Special Edition, aluminum roof/hood, split seven-spoke forged aluminum BBS wheels in “diamond black” finish, HID headlights with integrated fog lights, red-stitched Recaro seats
MR - 6-speed, Bilstein monotube shocks, split seven-spoke forged aluminum BBS wheels, aluminum roof, gauge pack, HID headlights with integrated fog lights, vortex generator, and custom MR badging.
To the standard (or “GSR”) model, the Sun, Sound and Leather package adds a power sunroof, HID xenon headlamps with integrated fog lights, slightly upgraded speakers, a powered, trunk-mounted Infinity subwoofer, black leather seating surfaces, slightly revised center armrests front and rear, and separate rear headrests. This model deletes the GSR’s headliner-mounted sunglass holder to make room for the sunroof.
A 2,500-piece, limited edition Evolution IX station wagon will be released in
Mitsubishi also developed the Evolution MIEV, based on the Evolutions IX’s chassis but with four electric motors connected to the wheels as a test bed for the Mitsubishi In-wheel Electric Vehicle (MIEV) next-generation electric vehicle. The in-wheel motors use a hollow doughnut construction to locate the rotor outside the stator, unlike other electric motors where the rotor turns inside the stator. The result of this is a lighter motor which translates into lower unsprung weight in a system where the motors are mounted in the wheels. Each in-wheel motor produces a power output of 68 hp (51 kW), thus giving a combined output of 272 hp (203 kW), comparable to that of regular, gas powered Lancer Evolutions. The car subsequently competed in the Shikoku EV (Electric Vehicle) Rally 2005.
Production
March 2005–2007
Platform
CT9A
Wheelbase
2625 mm (103.3 in)
Length
4490 mm (176.8 in)
Width
1770 mm (69.7 in)
Height
1450 mm (57.1 in)
Curb weight
1310 kg (2888 lb)–1400 kg (3086 lb)
MITSUBISHI LANCER EVOLUTION X
In 2005, Mitsubishi introduced a concept version of the next-gen Evolution at the 39th Tokyo Motor Show named the Concept-X.Mitsubish
Lancer Evolution X will feature a newly designed 4B11T 2.0 L turbocharged, all-aluminum Straight-4 engine. Power and torque depend on the market (North American version: 291 hp and 300 lbf·ft, Japanese version: 291 hp and 300 lbf·ft,
The car has also a new full-time four-wheel drive system named S-AWC (Super All Wheel Control), an advanced version of Mitsubishi’s AWC system used in previous generations. The S-AWC uses torque vectoring technology to send different amount of torque to any wheel at any given time.
It also features Mitsubishi’s new sequential semi-automatic six speed Twin Clutch SST twin-clutch transmission with steering-mounted magnesium alloy shift paddles. A 5-speed manual gearbox will also be available. Mitsubishi claims that the 5 speed manual transmission has always been preferred in rallying and should be very refined, resulting in a more satisfying drive. New Lancer Evolution will incorporate Mitsubishi’s next generation RISE safety body.
The production version of Prototype-X has begun production in Autumn 2007. The Evolution X went on sale Oct. 1, 2007 in
Japanese models
The engine is the 4B11-type 2.0 litre inline-4 turbo, derived from the World Engine in Lancer. Engine is rated 422 Nm (43.0 kg-m)@3500 rpm. Aluminum is used in the roof panel, front fenders and the rear spoiler frame structure.
RS - 5 speed manual transmission. 18-inch tires. Driver dual-stage airbag. Standard Engine immobilizer.
GSR - Standard rear spoiler. 5 speed manual or 6-speed Twin Clutch SST transmission (magnesium paddle shifters on SST model). 245/40R18 tire on Enkei 12-spoke high-rigidity cast alloy wheels or optional BBS lightweight alloy wheels. Brembo ventilated disc brakes. Standard S-AWC 4WD system. Driver and front passenger dual-stage airbag. Standard. Engine immobilizer with security alarm. Optional Mitsubishi Motors Communication System (MMCS) which comprises a 30Gb hard disk drive audio/navigation system with 7-inch LCD screen. Optional Rockford Fosgate premium sound system. Optional keyless remote entry.
GSR can be fitted with following packages:
–High Performance Package - Bilstein single tube shock absorbers and Eibach coil springs,brembo 2-piece disc brakes, high performance tires with stiffer walls and better grip.
–Stylish Exterior Package - Chrome finish for the front grille lattice and beltline molding, body color-keyed fender vents, adds fog lamps. –Leather Combination Interior -
–Premium Package - All 3 above packages plus 18-inch BBS lightweight alloy wheels.
Production
October 2007-
Platform
Mitsubishi GS platform
Transmission(
6-speed twin-clutch gearbox,5-speed manual
Wheelbase
2650 mm (104.3 in)
Length
4530 mm (178.3 in)
Width
1830 mm (72.0 in)
Height
1470 mm (57.8 in)
Curb weight
1537 kg (3388 lb)
Confidential/
� Kad Kahwin - http://www.kadkahwin.biz
� Pengiklanan PERCUMA - http://www.interniaga.com
� Kad Nama Online - http://www.kadnama.com
� Koleksi Lirik Lagu - http://www.liriklagu.interniaga.com
� Blog, Video & MP3 - http://www.pdniaga.multiply.com
� Kad IPC Shopping - http://www.empay4u.com
� PD Niaga Blog - http://pdniaga-blog.blogspot.com
� Jana Iklan � http://www.janaiklan.com
Senarai Group & Keahlian Melalui Email:
1. automobil-subscribe@yahoogroups.com
http://groups.yahoo.com/group/automobil
2. HitZ-subscribe@yahoogroups.com
http://groups.yahoo.com/group/HitZ
3. pdniaga-subscribe@yahoogroups.com
http://groups.yahoo.com/group/pdniaga
4. dunia-politik-subscribe@yahoogroups.com
http://groups.yahoo.com/group/dunia-politik
5. bolasepak-subscribe@yahoogroups.com
http://groups.yahoo.com/group/bolasepak
6. auto-chat-subscribe@yahoogroups.com
http://groups.yahoo.com/group/auto-chat
7. ArenaPC-subscribe@yahoogroups.com
http://groups.yahoo.com/group/ArenaPC
8. pd-net-subscribe@yahoogroups.com
http://groups.yahoo.com/group/pd-net
9. interniaga-subscribe@yahoogroups.com
http://groups.yahoo.com/group/interniaga
10. EBuku2-subscribe@yahoogroups.com
http://groups.yahoo.com/group/EBuku2U
10. JanaIklan-subscribe@yahoogroups.com
http://groups.yahoo.com/group/JanaIklan
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___
No comments:
Post a Comment