Wednesday, October 14, 2009

www.auto.pdniaga.com - Digest Number 2465[3 Attachments]

Messages In This Digest (12 Messages)

Messages

1a.

Re: Testimoni Guna Minyak Sawit Sebagai Minyak Pelincir

Posted by: "fuzzy 1" fuzzyinn@yahoo.com   fuzzyinn

Tue Oct 13, 2009 6:58 pm (PDT)



Bro. Azmi .. dalam erti kata lain bermakna minyak cap Buruh pun boleh digunakan jugak la ya.

________________________________
From: moderator_bertugas <encikmie@gmail.com>
To: automobil@yahoogroups.com
Sent: Tue, October 13, 2009 4:28:41 PM
Subject:Re: www.auto.pdniaga.com - Testimoni Guna Minyak Sawit Sebagai Minyak Pelincir

Boleh kata majoriti kedai spare part ada jual ni.
Ada 2 jenis..

Bardhal No.1 (engine treatment)
Bardhal No.2 (oil treatment)

--- In automobil@yahoogrou ps.com, MHZ <cekelatgetah@ ...> wrote:
>
> Bardhal engine treatment tu ada jual kat mana? kedai sparepart ada jual ke?
>
> Azmi OilyMan wrote:
> >
> >
> > Lagi update:
> >
> > Baru balik dr workshop, tukar myk hitam baru..SAJI. Kali ni saya tambah
> > Bardhal No.1 (engine treatment).
> >
> > Rupa-rupanya myk cap buruh yg saya pakai minggu lps tu bukan ada
> > masalah. Yg masalah ialah oil filter, ada leaking, patut la myk kurang,
> > bila saya pandu laju ia akan melekat kat body belakang.
> >
> > Kebetulan saya pun tgh test oil filter utk Proton pakai kat Peugeot.
> > Thread mmg sama cuma oil seal tak sama besar, yg proton kecik sket, sb
> > tu ia leaking..
> >
> > Sekian harap maklum..
> >
> >
>

Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (14)
2.1.

Re: camne nak lajukan 1.5 auto?

Posted by: "fuzzy 1" fuzzyinn@yahoo.com   fuzzyinn

Tue Oct 13, 2009 8:21 pm (PDT)



betul dan boleh diguna pakai untuk orang yang terlebih-;ebih wang .. ya la kereta untuk kesurau lain ..kereta untuk kemesjid lain ..kereta untuk kepasar lain.. kereta untuk hantar anak sekolah lain .. kereta untuk bersantai petang2 lain .. kereta untuk bersantai hari minggu lain .. kereta untuk dalam bandar lain .. kereta untuk balik kampung lain .. kereta untuk pergi kerja lain... tetapi berapa kerat sangat orang yang mampu untuk berbuat demikian .. saudara kita tu bertanya mungkin sebagai sebagai seorang awam untuk kegunaan pelbagai tujuan dengan kemampuan kewangan yang terhad .. kalau beliau mampu mungkin beliau tak terlintas soalan cam tu.... atau pun mungkin beliau seorang yang suka merendah diri .. macam BILLIONAIRE Syed AlBukari tu kununya pakai proton perdana jer......

________________________________
From: NagoMakeOre <nagoboror@gmail.com>
To: automobil@yahoogroups.com
Sent: Tue, October 13, 2009 1:43:38 PM
Subject:Re: www.auto.pdniaga.com - camne nak lajukan 1.5 auto?

Salam kenkawan semua,

Saya teramat bersetuju dengan pendapat Sedara Azmi (Orang Minyak). Kebanyakan member kita semua ni semacam melupakan tujuan sesebuah kereta itu di buat.

Terdapat beberapa kategori kereta dan tujuan dibuat:-
1. Compact Car - kereta ni sesuai untuk city driving.. utk buat gi kerja. Tujuannya utk meminimakan penggunaan minyak. Kereta ni bukan utk racing kat jalan macam kita selalu nengok tu... Kancil, Myvi, Picanto dll.

2. Sedan Car - Kereta utk family. Sesuai utk leisure driving, bawa anak bini, juga utk pegi kerja. Tak berapa sesuai utk lari laju kecuali telah ditukar brand spt Mercedes, BMW, Peaugot, VW. Kalau setakat pakai jenama Proton tu, tak yah lah nak laju-laju, safety hampeh.

3. Sport Car - Kereta ni buat utk dipandu laju. Tak sesuai utk pegi kerja. Kalau rasa2 nak laju, dipersilakan pakai kereta ni sbb semua ciri2 keselamatan telah buat. Tak yah bimbang kalau eksiden, peluang nak idup masih ada compare ngan Kancil Turbo / Wira Turbo dll keta yg di upgrade.

4. MPV - Keta ni utk bawa keluarga dihujung minggu. Amat tak sesuai utk pegi kerja apatah lagi utk buat racing.

5. SUV - Keta ni utk mrk yg suka dilihat lain dr yg lain. Kebanyakannya utk orang berWang saja.

Macam cadangan utk sedara kita nak melajukan kereta tu, pd pandangan saya la.. baik tak payah... baik you beli je kereta lain yg dibuat utk di pandu laju cam peaugot atau BMW. Rasanya rega kete tu ngan kos modified tu hampir sama jerrr betul tak En. Azmi.

Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (28)
2.2.

Re: camne nak lajukan 1.5 auto?

Posted by: "Nazri Ahtar" littlenoti@yahoo.com   littlenoti

Tue Oct 13, 2009 8:23 pm (PDT)



salam,

pendapat saya (pendapat je haaa.....), dari rebore enjin yang kita tak tahu tahap kekemasan orang yang buat rebore enjin tu, belum tahu lagi tahap kecekapan orang yang nak pasang balik enjin tu, tork berapa dia guna nak ketatkan skru2 pada blok, pada head, adjust tap-pad tak ? tukar valve seal / oil-seal / timing belt / waterpump lagik ? tu belum ambik kira quality spareparts yang diguna pakai. original ka, china made ke, taiwan made ka, kedai potong cabut ka ?

rebore2 nih, preasure dalam blok dah lain, nanti preasure pada cooling system dah lain. buatnya ada leaking ntah mana2, enjin overheat, piston jammed....enjin dah tak boleh nak rebore dah. mau campak buang kat laut jadi tukun je lagik. kesian kat mamat2 kat R&D, pening kepala pikir nak buat sistem enjin stabil, nak check preasure dalam enjin brape, crank shaft berapa kuat, cam-shaft lagik, kene buat simulation pada PC dulu, check dulu endurance enjin camne, braper hp dapat... bukan sorang dua engineer nak design satu enjin nih. (kalau sesaper ada artikel pasal enjin proton+lotus yang terbaru tu..... 70 engineers terlibat utk rekacipta enjin baru tu.... 1.6 compressed, kuasanya seolah2 enjin 2.0... menarik nih!). 70 engineers tu..... bukan sorang dua.....

kesimpulan saya, if nak performance, baik beli halfcut enjin lain... mivec ke ape ke (saya tak tau sangat nama2 enjin nih). kalau beli halfcut, enjin walaupun bukan dara, tapi original state. dapat discbrake depan belakang, dapat dashboard lain, gearbox pun dapat yang lain... selain dapat performance, kita juga dapat safety, dan yang paling utama... bak kata bro black canary..... poket rabak :). kalau saya nak tukar enjin, bukan takat poket seluar rabak.... dengan baju, dengan kulit2 sekali rabak..... kalau boleh bulu hidung jual timbang kati ler......(kalau laku ermm)... hehehhee

selamat hari raya !!
rgds,
Nazri Ahtar

________________________________
From: "black_canary@yahoogroups.com" <black_canary@yahoogroups.com>
To: automobil@yahoogroups.com
Sent: Mon, October 12, 2009 3:35:37 PM
Subject:RE: www.auto.pdniaga.com - camne nak lajukan 1.5 auto?

Hide ID, just black_canary

Mahu RABAK poket seluar kot…hehehe


________________________________

From:automobil@yahoogrou ps.com [mailto: automobil@yahoogrou ps.com ] On Behalf Of fuzzy 1
Sent: Monday, October 12, 2009
2:58 PM
To: automobil@yahoogrou ps.com
Cc: palie_zas82@ hotmail.com
Subject:Re: www.auto.pdniaga. com
- camne nak lajukan 1.5 auto?


Berapa anggaran kos kalau REBORE ka size 1.8?

________________________________

From:Mohd Fadli
<palie_zas82@ hotmail.com>
To: automobil@yahoogrou ps.com
Sent: Mon, October 12, 2009
12:31:44 PM
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

alang mnyeluk pekasam biar sampai pangkal lengan.
rebore turus maximun size 1.8.
baru power..
perdana v6 pun xdpt kejor yop...

________________________________

To: automobil@yahoogrou ps.com
From: mr.oilyman@gmail. com
Date: Mon, 12 Oct 2009 12:17:07 +0800
Subject: Re: www.auto.pdniaga.
com - camne nak lajukan 1.5 auto?

Salam,

Maaf sb nak komen off-topik. Drpd membazir duit modified kete Wira auto tu,
lebih baik kumpul modal dan beli kete yg dah power dan yg paling penting kete
tersebut selamat utk dipandu laju.

Cari kete continental la... sy sedih sb ramai pengguna jalanraya kita mati,
salah satu puncanya ialah kete tersebut, kete kita tak selamat. Kalau tak
eksiden takpe, bila eksiden sket pun dah kemek..

Saya sendiri pernah mengalami eksiden dgn peugeot 405 saya dulu. Langgar pokok
sawit dan tiang lampu. Yg bestnya, kete tersebut masih mampu dipandu ke
workshop. Kalau kancil atau wira saya rasa mesti dah tercabut tayar.

So, nasihat saya..kalau nak laju, cari kete yg sesuai & selamat utk laju.
BMW, Mercedes skrg pun dah murah..lebih murah dari Perodua Viva..

Utk kete wira auto anda skrg ni...cukup hanya dgn cuci karbon enjin guna produk
oilyman, kalau rajin tambah la batu akuarium sebiji...setel

Selamat memandu.. pandu selamat jiwa selamat, ingat lah WANG tersayang.

------
Azmi Abdullah
OILYMAN TECHNOLOGY
Shah Alam, Selangor , MALAYSIA
Tel: +60192764645 or +60176930306
E-Mail: azmi@oilyman. com.my
Web: www.oilyman. com.my
Video: http://www.youtube.
com/user/ mienyak
Forum: http://oilyman.
com.my/forum
WE SUPPLY BEST QUALITY OF ENGINE CARBON CLEANER (DECARBONIZER)

2009/10/12 <kairul@yahoogroups. com>


Mod hide
id plz… trumpet aje..

Ni nak
modai kecik ke nak modai besor kasi laju.. kalau modai kecik kecik boleh buat
macam kekawan sarankan tu.. tapi kalau nak betui betui nak buat belanja dia
besor dan puas hati

1.) Kalau nak maintain tukor webber nak best pakai
twin (kena beli tapak wabber gaks) kena cari. Injection lain laks ceritanye
2.) rebore piston pakai piston compro 1.6
3.) tukor crank pakai campro 1.6 (payah nak dapat ni)
4.) pakai mat speed cam
5.) port & polish head, valve angle.
6.) piping kena pakai 2 inch
7.) dah buat enjin power fly wheel pon kena tukor
pakai 1.8 nye
8.) nak betui betui rasa power transfer pakai 3 kaki
nye clutch plate (untuk daily driving)
9.) nak cun cari gearbox mivec kalau dapat lsd lagi
best.
10.)Break pon upgrade gaks tukor servo break double layer (evo).
11.)Break depan at least 1.6nye
12.) Pakai adjustable. Jangan beli yang murah ambik yang elok
sikit gab,tein, titan (kastem made)
13.) Tayor jangan pakai tayor biasa biasa atau tanyor toreh bila
enjin dah kuat. Se elok nye cari soft compound.

Kosbuat ni boleh dapat
sebijik halfcut GSR or MIVEC. Tapi tu rega injin halfcut yang akan keluor
belanja untuk repair enjin dah selengara. Dengan modal ko labor kan enjin ko ni nanti
boleh consider tip top dan tak perlu endos. Power cc dah dekat 1.7. Nanti ko
pantang jumpe keta NA power nak ajak test memanjang aje.. heheheh

Kalau
aku la ade duit simpan lagi best.. hehehehe



________________________________

From:automobil@yahoogrou ps.com [mailto:automobil@yahoogrou ps.com] On Behalf Of Shahrul Izwan
Sent: Sunday, October 11, 2009
3:01 PM

To: automobil@yahoogrou ps.com
Subject: RE: www.auto.pdniaga. com -
camne nak lajukan 1.5 auto?


kedai tu
area sg dua island..nanti tgk saya dapatkan no tipon dari
member...anggaran kos dlm RM300 tu...menda tu dah siap ada..cuma bila sedara pi
kedai dia,dia akan ambik kaburetor lama,terus dia gantikan dgn kaburetor
modified tu.. kira tak perlu tunggu lama la...kaburetor tu semua diorang
modified kat KL dan bila dah siap baru shipped ke Penang ..kompilkasi?
?..minyak lagi kuat la kot...saya x penah try menda nie sebab keta guna
injection... tapi sembang ngan salah sorg pengguna kaburetor modified ni memang
diorang kata ada byk perbezaan dari segi power dan pickup...


________________________________

From:automobil@yahoogrou ps.com [mailto:automobil@yahoogrou ps.com] On Behalf Of Hisham Mohd
Sent: Sunday, October 11, 2009
12:20 PM
To: automobil@yahoogrou ps.com
Subject: RE: www.auto.pdniaga. com -
camne nak lajukan 1.5 auto?

owh ..terima kasih lah ..
nak tanya sikit area penang kat ne tu yang leh wat bende tu?ada alamat ke ..
macam saya nie dari area ipoh ..
berapa anggaran dia modified kaburetor tu?takda komplikasi ke ...

--- On Sat, 10/10/09, Shahrul Izwan <Shahrul.Izwan@ wdc.com> wrote:

From: Shahrul Izwan <Shahrul.Izwan@ wdc.com>
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?
To: automobil@yahoogrou ps.com
Date: Saturday, October 10, 2009, 11:28 PM

salam,
bule try langkah di bawah:-
1.buat balik ekzos system dari depan sampai belakang..carani biasanya lebih mudah dan lebih murah tapi kena carik mekanik ekzos yg betoi2 tau buat keja..bukannnya yg jenis pakai rekemen je suruh tuka itu ini tapi habuk pun tarak..cik mat bule bantu kot?
2.pastikan kalau buat ekzos sytem,system penapis udara pun kena upgrade sebab nak support angin masuk..bule gunakan brand hks/k&n umpamanya..tapi nasihat saya satu, cuba elakkan guna breather sebab breather ni akan mengganggu system vacuum enjin..
kalau ada bajet byk tapi tak mo tuka enjin:-
1.tukar camshaft gunakan yg hi-performance
2.gunakan stroker kit
3.gunakan modified kaburetor..kat penang ni ada satu kedai bule buat..kotak kaburetor luar sama cam ori tapi dlm(jet,pelampung bla2) semua tukar lain..testimoni org yg guna memang diorang kata enjin lagi power...kos kalau x salah dlm RM300/=..
kalau rasa yg atas extreme sgt bule kontek cik razali utk beberapa komponen plug & play...


________________________________

From:automobil@yahoogrou ps.com [mailto:automobil@ yahoogroups. com] On Behalf Of Hisham Mohd
Sent: Sunday, October 11, 2009 12:45 AM
To: automobil@yahoogrou ps.com
Subject: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

salam kenal otai otai semua ..

aku orang baru kat sini,minta tunjuk ajar pada aku yang kurang pro bab kereta nie ...boleh kot ek?..
aku ada kereta,kereta wira sedan 1.5 auto kaburetor,pick up ok la juga...cuma aku nak minta pandangan sesapa yang pro yang bole ceritakan sikit camne lah ek aku nak lajukan kuasa wira 1.5 auto aku nie agar nampak lebih sempurna ... tanpa menukar enjin lain,aku ada dengar orang kata,dengan menukar piston dan valve yang lebih besar,ianya mampu memberikan kuasa prestasi yang agak baik,tol ke?lagi ... ada sesapa yang boleh bagi cadangan

terima kasih



____________ _________ _________ _________ _________ _________ _________ ____
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagel abs.com/email
____________ _________ _________ _________ _________ _________ _________ ____
DISCLAIMER:-
This email and any attachments are confidential and intended only for the use of the individual or entity named above and may contain information that is privileged. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email, delete the original message and destroy all copies made. Any views expressed are those of the individual sender, and not necessarily the views of Cycle Carriage Bintang Bhd and/or any of its related corporations. Although reasonable precautions have been taken to scan incoming and outgoing emails and attachments for viruses, Cycle Carriage Bintang Group can not guarantee this communication to be free of all viruses nor accept any responsibility for any consequences caused by viruses.
____________ _________ _________ _________ _________ _________ _________ ____
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagel abs.com/email
____________ _________ _________ _________ _________ _________ _________ ____

Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (28)
2.3.

Re: camne nak lajukan 1.5 auto?

Posted by: "Abdul Hadi Hj Abdullah" hadi@mhsaviation.com

Wed Oct 14, 2009 3:41 am (PDT)



Assalamualaikum,

Alat ini (Surbo) di pasang di dlm hose selepas kotak penapis udara menghala ke
trottle body, ia akan menghasilkan angin pusaran yang kuat,
ia akan menurangkan TEKANAN penghawa dingin dan hasilnya kereta kita ada
PICK-UP dan dapat penjimatan petrol.

No. H/P saya : 019-915 2664 / 019-267 8429.

Sila contact saya jika berminat utk pemasangan.

Terima kasih.
Abdul Hadi Hj Abdullah
(Pengedar: Subang/Shah Alam)

----- Original Message -----
From: Hisham Mohd
To: automobil@yahoogroups.com
Sent: Monday, October 12, 2009 6:15 PM
Subject: RE: www.auto.pdniaga.com - camne nak lajukan 1.5 auto?

hemm .. leh tahan juga ek dengan surbo,so aku nak tanya lah sikit tentang benda surbo @ twin surbo nie?bagaimana benda ni berjalan pada enjin coz plug n play je kan?pe pula bezanya dengan earth wired ...coz sebelum ni pon aku pernah lah kai earth wired nie .. cam sama je aku tengok,takda perubahan pon ..

--- On Mon, 10/12/09, Razali Bin Md Yusoff <razali.mdyusoff@osram-os.com> wrote:

From: Razali Bin Md Yusoff <razali.mdyusoff@osram-os.com>
Subject: RE: www.auto.pdniaga.com - camne nak lajukan 1.5 auto?
To: automobil@yahoogroups.com
Date: Monday, October 12, 2009, 6:58 AM

Maaf mengganggu J

Selamat Hari Raya & Maaf Zahir Batin

Salam, Tolong fwd pada rakan2 anda…TQ

Sempena menyambut Hari Raya yang kian menjelang nanti,

disini saya ingin mempromosikan alat-alat jimat petrol & tambah kuasa enjin kereta andai ketika pulang ke kampong berhari raya…

Pandu cermat jiwa selamat…

Website: http://www.petrolsa vers..blogspot. com

www.surbo.net

1) JIMAT PETROL SEHINGGA 20 ~ 35%

2) TAMBAH PICKUP SEHINGGA 20% ~ 35%

3) TAMBAH TOP SPEED SEHINGGA 30%

4) PICKUP LEBIH CEPAT KETIKA MEMOTONG

5) MUDAH MENDAKI BUKIT WALAUPUN MUATAN PENUH

6) TIADA MAINTENANCE (TAHAN SEPANJANG HAYAT)

7) TIADA KESAN SAMPINGAN PADA ENJIN

8) ENJIN MENJADI LEBIH RINGAN WALAUPUN AIRCOND SENTIASA DIPASANG

9) SESUAI UNTUK SEMUA JENIS KERETA BARU DAN LAMA, CARBURATOR & INJECTION

10) PEMASANGAN SECARA PERCUMA

single surbo: RM160 (harga biasa RM170)

twin surbo: RM300 (harga biasa RM340)

Call/SMS: 016-4831769

Luar kawasan: Pos Laju + RM10

RTEC Offer: RM150 (harga biasa RM200)

Call/SMS: 016-4831769

Luar kawasan: Pos Laju + RM10

MAXSPEED Offer: RM130 (harga biasa RM199)

Call/SMS: 016-4831769

Luar kawasan: Pos Laju + RM10

D1 Spec Offer: RM100 (harga biasa RM199)

Call/SMS: 016-4831769

Luar kawasan: Pos Laju + RM10

DYNOJET USA Offer: RM240 (harga biasa RM280)

Call/SMS: 016-4831769

Luar kawasan: Pos Laju + RM10

Harga Offer: RM150 (harga biasa RM298)

Call/SMS: 016-4831769

Luar kawasan: Pos Laju + RM10

JANGAN RISAU, ANDA AKAN DAPAT BALIK MODAL ANDA DALAM HANYA 3 ~ 4 BULAN SAHAJA... malah boleh dipindahkan ke kereta lain jika anda tukar kereta kelak…

(HASIL DARI PENJIMATAN PERTOL YANG ANDA GUNAKAN)

Pembelian melalui bank transfer (rujuk bawah) & PosLaju juga boleh. Manual cara pemasangan akan disertakan.. .

Tempahlah sekarang pada harga promosi ini

Bagi Luar Kawasan Pulau Pinang boleh order melalui Online. Sila Bank in ke akaun dibawah dan sms saya jenis barang yang hendak ditempah.

107143131880 ( Razali Md Yusoff)

Atau

07140119007524 ( Razali Md Yusoff)

Setelah pembayaran dibuat,sila sms ke 016-4831769 (Zali)

1. nama anda

2. no transaksi

3. masa bayaran

4. tarikh bayaran

5. Alamat anda

Thank you.

Best Regards,

Razali Md Yusoff
016-4831769

----------------------------------------------------------

From: automobil@yahoogrou ps.com [mailto: automobil@yahoogrou ps.com ] On Behalf Of Harris Bin Haron
Sent: Monday, October 12, 2009 12:20 PM
To: automobil@yahoogrou ps.com
Subject: RE: www.auto..pdniaga. com - camne nak lajukan 1.5 auto?

Salam….

Cadangan:

Pakai la SURBO ke CYCLONE ke….

Pas tu buat system ekzos yg sesuai….

Cuci carbon… dan juga pakai voltage stabilizer @ grounding cable….

Da beza da tu kuasa engine tu… cubalah….. Modal pun x besar tu…

H
MAAB
LCM

----------------------------------------------------------

From: automobil@yahoogrou ps.com [mailto: automobil@ yahoogroups. com ] On Behalf Of crook@yahoogroups. com
Sent: Monday, October 12, 2009 12:07 PM
To: automobil@yahoogrou ps.com
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

HIDE ID PLEASE,

Saya rasa kalau nak senang dan puashati, cuba try pakai surbo,rasanya tak payah tukar apa apa pun,

kalau tgk dia punya advertisement, surbo ni plug and play je,tu je cadangan saya,klu tak pik up juga,

try pulak pakai twin surbooo

SELAMAT HARI RAYA!!

crook

----------------------------------------------------------

From: automobil@yahoogrou ps.com [mailto: automobil@ yahoogroups. com ] On Behalf Of kairul@yahoogroups. com
Sent: Monday, October 12, 2009 10:09 AM
To: automobil@yahoogrou ps.com
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

Mod hide id plz… trumpet aje..

Ni nak modai kecik ke nak modai besor kasi laju.. kalau modai kecik kecik boleh buat macam kekawan sarankan tu.. tapi kalau nak betui betui nak buat belanja dia besor dan puas hati

1.) Kalau nak maintain tukor webber nak best pakai twin (kena beli tapak wabber gaks) kena cari. Injection lain laks ceritanye

2.) rebore piston pakai piston compro 1.6

3.) tukor crank pakai campro 1.6 (payah nak dapat ni)

4.) pakai mat speed cam

5.) port & polish head, valve angle.

6.) piping kena pakai 2 inch

7.) dah buat enjin power fly wheel pon kena tukor pakai 1.8 nye

8.) nak betui betui rasa power transfer pakai 3 kaki nye clutch plate (untuk daily driving)

9.) nak cun cari gearbox mivec kalau dapat lsd lagi best.

10.) Break pon upgrade gaks tukor servo break double layer (evo).

11.) Break depan at least 1.6nye

12.) Pakai adjustable. Jangan beli yang murah ambik yang elok sikit gab,tein, titan (kastem made)

13.) Tayor jangan pakai tayor biasa biasa atau tanyor toreh bila enjin dah kuat. Se elok nye cari soft compound.

Kos buat ni boleh dapat sebijik halfcut GSR or MIVEC. Tapi tu rega injin halfcut yang akan keluor belanja untuk repair enjin dah selengara. Dengan modal ko labor kan enjin ko ni nanti boleh consider tip top dan tak perlu endos. Power cc dah dekat 1.7. Nanti ko pantang jumpe keta NA power nak ajak test memanjang aje.. heheheh

Kalau aku la ade duit simpan lagi best.. hehehehe

----------------------------------------------------------

From: automobil@yahoogrou ps.com [mailto: automobil@yahoogrou ps.com ] On Behalf Of Shahrul Izwan
Sent: Sunday, October 11, 2009 3:01 PM
To: automobil@yahoogrou ps.com
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

kedai tu area sg dua island..nanti tgk saya dapatkan no tipon dari member...anggaran kos dlm RM300 tu...menda tu dah siap ada..cuma bila sedara pi kedai dia,dia akan ambik kaburetor lama,terus dia gantikan dgn kaburetor modified tu..kira tak perlu tunggu lama la...kaburetor tu semua diorang modified kat KL dan bila dah siap baru shipped ke Penang ..kompilkasi? ?..minyak lagi kuat la kot...saya x penah try menda nie sebab keta guna injection... tapi sembang ngan salah sorg pengguna kaburetor modified ni memang diorang kata ada byk perbezaan dari segi power dan pickup....

----------------------------------------------------------

From: automobil@yahoogrou ps.com [mailto: automobil@ yahoogroups. com ] On Behalf Of Hisham Mohd
Sent: Sunday, October 11, 2009 12:20 PM
To: automobil@yahoogrou ps.com
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

owh ..terima kasih lah ..
nak tanya sikit area penang kat ne tu yang leh wat bende tu?ada alamat ke ..
macam saya nie dari area ipoh ..
berapa anggaran dia modified kaburetor tu?takda komplikasi ke ...

--- On Sat, 10/10/09, Shahrul Izwan <Shahrul.Izwan@ wdc.com> wrote:

From: Shahrul Izwan <Shahrul.Izwan@ wdc.com>
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?
To: automobil@yahoogrou ps.com
Date: Saturday, October 10, 2009, 11:28 PM

salam,

bule try langkah di bawah:-

1.buat balik ekzos system dari depan sampai belakang..carani biasanya lebih mudah dan lebih murah tapi kena carik mekanik ekzos yg betoi2 tau buat keja...bukannnya yg jenis pakai rekemen je suruh tuka itu ini tapi habuk pun tarak..cik mat bule bantu kot?

2.pastikan kalau buat ekzos sytem,system penapis udara pun kena upgrade sebab nak support angin masuk..bule gunakan brand hks/k&n umpamanya..tapi nasihat saya satu, cuba elakkan guna breather sebab breather ni akan mengganggu system vacuum enjin..

kalau ada bajet byk tapi tak mo tuka enjin:-

1.tukar camshaft gunakan yg hi-performance

2.gunakan stroker kit

3.gunakan modified kaburetor..kat penang ni ada satu kedai bule buat..kotak kaburetor luar sama cam ori tapi dlm(jet,pelampung bla2) semua tukar lain..testimoni org yg guna memang diorang kata enjin lagi power...kos kalau x salah dlm RM300/=..

kalau rasa yg atas extreme sgt bule kontek cik razali utk beberapa komponen plug & play....

----------------------------------------------------------

From: automobil@yahoogrou ps.com [mailto:automobil@ yahoogroups. com] On Behalf Of Hisham Mohd
Sent: Sunday, October 11, 2009 12:45 AM
To: automobil@yahoogrou ps.com
Subject: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

salam kenal otai otai semua ..

aku orang baru kat sini,minta tunjuk ajar pada aku yang kurang pro bab kereta nie ...boleh kot ek?..
aku ada kereta,kereta wira sedan 1.5 auto kaburetor,pick up ok la juga...cuma aku nak minta pandangan sesapa yang pro yang bole ceritakan sikit camne lah ek aku nak lajukan kuasa wira 1.5 auto aku nie agar nampak lebih sempurna ... tanpa menukar enjin lain,aku ada dengar orang kata,dengan menukar piston dan valve yang lebih besar,ianya mampu memberikan kuasa prestasi yang agak baik,tol ke?lagi ... ada sesapa yang boleh bagi cadangan

terima kasih


Click here to report this email as spam.

Save the environmentReuse any bag at Tescoand collect Green Clubcard Points!Please consider the environment before printing this e-mail ----Disclaimer ---This email and any files transmitted with it ("Message") are confidential. Tesco may monitor and record all Messages. The views expressed in this Message are those of the sender and
not Tesco. Tesco does not accept liability for any damage, corruption caused by virus in this Message. Tesco Stores (Malaysia) Sdn. Bhd (521419K) Mezzanine Floor, No. 8, Jalan PJU 7/4, Mutiara Damansara, 47800 Petaling Jaya, Selangor Darul Ehsan, Malaysia. DISCLAIMER:- This email is confidential and intended only for the use of the individual or entity named above and may contain information that is privileged. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email or telephone and destroy the original message. Thank you.


Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (28)
2.4.

Re: camne nak lajukan 1.5 auto?

Posted by: "agai@017" agai_disini@yahoo.com.my

Wed Oct 14, 2009 3:41 am (PDT)



peerrgghhh.....
ringkas tapi padat...penuh mesej...
itu yang suka nazri kita ni bagi komen....heheheh
dari dulu lagi

gurau je tuan mod

________________________________
From: Nazri Ahtar <littlenoti@yahoo.com>
To: automobil@yahoogroups.com
Sent: Wednesday, 14 October 2009 10:43:22
Subject: Re: www.auto.pdniaga.com - camne nak lajukan 1.5 auto?

 
salam,

pendapat saya (pendapat je haaa.....), dari rebore enjin yang kita tak tahu tahap kekemasan orang yang buat rebore enjin tu, belum tahu lagi tahap kecekapan orang yang nak pasang balik enjin tu, tork berapa dia guna nak ketatkan skru2 pada blok, pada head, adjust tap-pad tak ? tukar valve seal / oil-seal / timing belt / waterpump lagik ?  tu belum ambik kira quality spareparts yang diguna pakai. original ka, china made ke, taiwan made ka, kedai potong cabut ka ? 

rebore2 nih, preasure dalam blok dah lain, nanti preasure pada cooling system dah lain. buatnya ada leaking ntah mana2, enjin overheat, piston jammed....enjin dah tak boleh nak rebore dah. mau campak buang kat laut jadi tukun je lagik. kesian kat mamat2 kat R&D, pening kepala pikir nak buat sistem enjin stabil, nak check preasure dalam enjin brape, crank shaft berapa kuat, cam-shaft lagik, kene buat simulation pada PC dulu, check dulu endurance enjin camne, braper hp dapat... bukan sorang dua engineer nak design satu enjin nih. (kalau sesaper ada artikel pasal enjin proton+lotus yang terbaru tu..... 70 engineers terlibat utk rekacipta enjin baru tu.... 1.6 compressed, kuasanya seolah2 enjin 2.0... menarik nih!). 70 engineers tu..... bukan sorang dua.....

kesimpulan saya, if nak performance, baik beli halfcut enjin lain... mivec ke ape ke (saya tak tau sangat nama2 enjin nih). kalau beli halfcut, enjin walaupun bukan dara, tapi original state. dapat discbrake depan belakang, dapat dashboard lain, gearbox pun dapat yang lain... selain dapat performance, kita juga dapat safety, dan yang paling utama... bak kata bro black canary..... poket rabak :). kalau saya nak tukar enjin, bukan takat poket seluar rabak.... dengan baju, dengan kulit2 sekali rabak..... kalau boleh bulu hidung jual timbang kati ler......(kalau laku ermm)... hehehhee

selamat hari raya !! 
rgds,
Nazri Ahtar

________________________________
From: "black_canary@ yahoogroups. com" <black_canary@ yahoogroups. com>
To: automobil@yahoogrou ps.com
Sent: Mon, October 12, 2009 3:35:37 PM
Subject:RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

 
Hide ID, just black_canary
 
Mahu RABAK poket seluar kot…hehehe
 

________________________________

From:automobil@yahoogrou ps.com [mailto: automobil@yahoogrou ps.com ] On Behalf Of fuzzy 1
Sent: Monday, October 12, 2009 2:58 PM
To: automobil@yahoogrou ps.com
Cc: palie_zas82@ hotmail.com
Subject:Re: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?
 
 
Berapa anggaran kos kalau REBORE ka size 1.8?

________________________________

From:Mohd Fadli <palie_zas82@ hotmail.com>
To: automobil@yahoogrou ps.com
Sent: Mon, October 12, 2009 12:31:44 PM
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

 

alang mnyeluk pekasam biar sampai pangkal lengan.
rebore turus maximun size 1.8.
baru power..
perdana v6 pun xdpt kejor yop...

________________________________

To: automobil@yahoogrou ps.com
From: mr.oilyman@gmail. com
Date: Mon, 12 Oct 2009 12:17:07 +0800
Subject: Re: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?

 
Salam,

Maaf sb nak komen off-topik. Drpd membazir duit modified kete Wira auto tu, lebih baik kumpul modal dan beli kete yg dah power dan yg paling penting kete tersebut selamat utk dipandu laju.

Cari kete continental la... sy sedih sb ramai pengguna jalanraya kita mati, salah satu puncanya ialah kete tersebut, kete kita tak selamat. Kalau tak eksiden takpe, bila eksiden sket pun dah kemek..

Saya sendiri pernah mengalami eksiden dgn peugeot 405 saya dulu. Langgar pokok sawit dan tiang lampu. Yg bestnya, kete tersebut masih mampu dipandu ke workshop. Kalau kancil atau wira saya rasa mesti dah tercabut tayar.

So, nasihat saya..kalau nak laju, cari kete yg sesuai & selamat utk laju. BMW, Mercedes skrg pun dah murah..lebih murah dari Perodua Viva..

Utk kete wira auto anda skrg ni...cukup hanya dgn cuci karbon enjin guna produk oilyman, kalau rajin tambah la batu akuarium sebiji...setel

Selamat memandu.. pandu selamat jiwa selamat, ingat lah WANG tersayang.

------
Azmi Abdullah
OILYMAN TECHNOLOGY
Shah Alam, Selangor , MALAYSIA
Tel: +60192764645 or +60176930306
E-Mail: azmi@oilyman. com.my
Web: www.oilyman. com.my
Video:  http://www.youtube. com/user/ mienyak
Forum: http://oilyman. com.my/forum
WE SUPPLY BEST QUALITY OF ENGINE CARBON CLEANER (DECARBONIZER)

2009/10/12 <kairul@yahoogroups. com>
 
 
Mod hide id plz… trumpet aje..
 
Ni nak modai kecik ke nak modai besor kasi laju.. kalau modai kecik kecik boleh buat macam kekawan sarankan tu.. tapi kalau nak betui betui nak buat belanja dia besor dan puas hati
 
1.)     Kalau nak maintain tukor webber nak best pakai twin (kena beli tapak wabber gaks) kena cari. Injection lain laks ceritanye
2.)     rebore piston pakai piston compro 1.6
3.)     tukor crank pakai campro 1.6 (payah nak dapat ni)
4.)     pakai mat speed cam
5.)     port & polish head, valve angle.
6.)     piping kena pakai 2 inch
7.)     dah buat enjin power fly wheel pon kena tukor pakai 1.8 nye
8.)     nak betui betui rasa power transfer pakai 3 kaki nye clutch plate (untuk daily driving)
9.)     nak cun cari gearbox mivec kalau dapat lsd lagi best.
10.)Break pon upgrade gaks tukor servo break double layer (evo).
11.)Break depan at least 1.6nye
12.) Pakai adjustable. Jangan beli yang murah ambik yang elok sikit gab,tein, titan (kastem made)
13.) Tayor jangan pakai tayor biasa biasa atau tanyor toreh bila enjin dah kuat. Se elok nye cari soft compound.
 
Kosbuat ni boleh dapat sebijik halfcut GSR or MIVEC. Tapi tu rega injin halfcut yang akan keluor belanja untuk repair enjin dah selengara. Dengan modal ko labor kan enjin ko ni nanti boleh consider tip top dan tak perlu endos. Power cc dah dekat 1.7. Nanti ko pantang jumpe keta NA power nak ajak test memanjang aje.. heheheh
 
Kalau aku la ade duit simpan lagi best.. hehehehe
 
 

________________________________

From:automobil@yahoogrou ps.com [mailto:automobil@yahoogrou ps.com] On Behalf Of Shahrul Izwan
Sent: Sunday, October 11, 2009 3:01 PM

To: automobil@yahoogrou ps.com
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?
 
 
kedai tu area sg dua island..nanti tgk saya dapatkan no tipon dari member...anggaran kos dlm RM300 tu...menda tu dah siap ada..cuma bila sedara pi kedai dia,dia akan ambik kaburetor lama,terus dia gantikan dgn kaburetor modified tu.. kira tak perlu tunggu lama la...kaburetor tu semua diorang modified kat KL dan bila dah siap baru shipped ke Penang ..kompilkasi? ?..minyak lagi kuat la kot...saya x penah try menda nie sebab keta guna injection... tapi sembang ngan salah sorg pengguna kaburetor modified ni memang diorang kata ada byk perbezaan dari segi power dan pickup...
 

________________________________

From:automobil@yahoogrou ps.com [mailto:automobil@yahoogrou ps.com] On Behalf Of Hisham Mohd
Sent: Sunday, October 11, 2009 12:20 PM
To: automobil@yahoogrou ps.com
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?
 
owh ..terima kasih lah ..
nak tanya sikit area penang kat ne tu yang leh wat bende tu?ada alamat ke ..
macam saya nie dari area ipoh ..
berapa anggaran dia modified kaburetor tu?takda komplikasi ke ...

--- On Sat, 10/10/09, Shahrul Izwan <Shahrul.Izwan@ wdc.com> wrote:

From: Shahrul Izwan <Shahrul.Izwan@ wdc.com>
Subject: RE: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?
To: automobil@yahoogrou ps.com
Date: Saturday, October 10, 2009, 11:28 PM
 
salam,
bule try langkah di bawah:-
1.buat balik ekzos system dari depan sampai belakang..carani biasanya lebih mudah dan lebih murah tapi kena carik mekanik ekzos yg betoi2 tau buat keja..bukannnya yg jenis pakai rekemen je suruh tuka itu ini tapi habuk pun tarak..cik mat bule bantu kot?
2.pastikan kalau buat ekzos sytem,system penapis udara pun kena upgrade sebab nak support angin masuk..bule gunakan brand hks/k&n umpamanya..tapi nasihat saya satu, cuba elakkan guna breather sebab breather ni akan mengganggu system vacuum enjin..
kalau ada bajet byk tapi tak mo tuka enjin:-
1.tukar camshaft gunakan yg hi-performance
2.gunakan stroker kit
3.gunakan modified kaburetor..kat penang ni ada satu kedai bule buat..kotak kaburetor luar sama cam ori tapi dlm(jet,pelampung bla2) semua tukar lain..testimoni org yg guna memang diorang kata enjin lagi power...kos kalau x salah dlm RM300/=..
kalau rasa yg atas extreme sgt bule kontek cik razali utk beberapa komponen plug & play...
 

________________________________

From:automobil@yahoogrou ps.com [mailto:automobil@ yahoogroups. com] On Behalf Of Hisham Mohd
Sent: Sunday, October 11, 2009 12:45 AM
To: automobil@yahoogrou ps.com
Subject: www.auto.pdniaga. com - camne nak lajukan 1.5 auto?
 
salam kenal otai otai semua ..

aku orang baru kat sini,minta tunjuk ajar pada aku yang kurang pro bab kereta nie ...boleh kot ek?..
aku ada kereta,kereta wira sedan 1.5 auto kaburetor,pick up ok la juga...cuma aku nak minta pandangan sesapa yang pro yang bole ceritakan sikit camne lah ek aku nak lajukan kuasa wira 1.5 auto aku nie agar nampak lebih sempurna ... tanpa menukar enjin lain,aku ada dengar orang kata,dengan menukar piston dan valve yang lebih besar,ianya mampu memberikan kuasa prestasi yang agak baik,tol ke?lagi ... ada sesapa yang boleh bagi cadangan

terima kasih
 
 
 ____________ _________ _________ _________ _________ _________ _________ ____
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagel abs.com/email
____________ _________ _________ _________ _________ _________ _________ ____
DISCLAIMER:-
This email and any attachments are confidential and intended only for the use of the individual or entity named above and may contain information that is privileged. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email, delete the original message and destroy all copies made. Any views expressed are those of the individual sender, and not necessarily the views of Cycle Carriage Bintang Bhd and/or any of its related corporations. Although reasonable precautions have been taken to scan incoming and outgoing emails and attachments for viruses, Cycle Carriage Bintang Group can not guarantee this communication to be free of all viruses nor accept any responsibility for any consequences caused by viruses.
____________ _________ _________ _________ _________ _________ _________ ____
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagel abs.com/email
____________ _________ _________ _________ _________ _________ _________ ____

__________________________________________________________
Get your new Email address!
Grab the Email name you&#39;ve always wanted before someone else does!
http://mail.promotions.yahoo.com/newdomains/my/
Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (28)
2.5.

Re: camne nak lajukan 1.5 auto?

Posted by: "Izatt" evo98my@yahoo.com   evo98my

Wed Oct 14, 2009 3:41 am (PDT)



2. Sedan Car - Kereta utk family. Sesuai utk leisure driving, bawa anak
bini, juga utk pegi kerja. Tak berapa sesuai utk lari laju kecuali
telah ditukar brand spt Mercedes, BMW, Peaugot, VW. Kalau setakat pakai
jenama Proton tu, tak yah lah nak laju-laju, safety hampeh.

hmm..kalo macam kete NAZA 206 bestari tu boleh laa dikategorikan dlm kete peaugot kan...

--- On Tue, 10/13/09, Azmi OilyMan <mr.oilyman@gmail.com> wrote:

From: Azmi OilyMan <mr.oilyman@gmail.com>
Subject: Re: www.auto.pdniaga.com - camne nak lajukan 1.5 auto?
To: automobil@yahoogroups.com
Date: Tuesday, October 13, 2009, 3:47 PM

 

Betul tu betul...

Masalahnya ramai org kita takut pakai kete conti sb sparepart mahal..katanya.

Bagi saya kena kira overall.. kena ambil kira faktor harga beli, saya beli kete conti 2nd lebih baik dari kete jepun baru.. (ini diakui oleh kawan saya yg baru beli Camry terbaru..dia ckp better Peugeot 405 masa dia beli baru dulu).

Tadi sembang dgn pomen saya, dia ckp ada customer dia tukar drive shaft Nissan Serena Hiway Star (model terbaru). Harga drive shaft RM3,000. Akhirnya beli 2nd RM800. Kalau peugeot RM800 dah dapat brand new ori..

So..fikir2 kan lah..
------
Azmi Abdullah
OILYMAN TECHNOLOGY
Shah Alam, Selangor, MALAYSIA
Tel: +60192764645 or +60176930306
E-Mail: azmi@oilyman. com.my

Web: www.oilyman. com.my
Video:  http://www.youtube. com/user/ mienyak
Forum: http://oilyman. com.my/forum

WE SUPPLY BEST QUALITY OF ENGINE CARBON CLEANER (DECARBONIZER)

2009/10/13 NagoMakeOre <nagoboror@gmail. com>

 

Salam kenkawan semua,
 
Saya teramat bersetuju dengan pendapat Sedara Azmi (Orang Minyak). Kebanyakan member kita semua ni semacam melupakan tujuan sesebuah kereta itu di buat.
 
Terdapat beberapa kategori kereta dan tujuan dibuat:-
1. Compact Car - kereta ni sesuai untuk city driving.. utk buat gi kerja. Tujuannya utk meminimakan penggunaan minyak. Kereta ni bukan utk racing kat jalan macam kita selalu nengok tu... Kancil, Myvi, Picanto dll.

 
2. Sedan Car - Kereta utk family. Sesuai utk leisure driving, bawa anak bini, juga utk pegi kerja. Tak berapa sesuai utk lari laju kecuali telah ditukar brand spt Mercedes, BMW, Peaugot, VW. Kalau setakat pakai jenama Proton tu, tak yah lah nak laju-laju, safety hampeh.

 
3. Sport Car - Kereta ni buat utk dipandu laju. Tak sesuai utk pegi kerja. Kalau rasa2 nak laju, dipersilakan pakai kereta ni sbb semua ciri2 keselamatan telah buat. Tak yah bimbang kalau eksiden, peluang nak idup masih ada compare ngan Kancil Turbo / Wira Turbo dll keta yg di upgrade.

 
4. MPV - Keta ni utk bawa keluarga dihujung minggu. Amat tak sesuai utk pegi kerja apatah lagi utk buat racing.
 
5. SUV - Keta ni utk mrk yg suka dilihat lain dr yg lain. Kebanyakannya utk orang berWang saja.
 
Macam cadangan utk sedara kita nak melajukan kereta tu, pd pandangan saya la.. baik tak payah... baik you beli je kereta lain yg dibuat utk di pandu laju cam peaugot atau BMW. Rasanya rega kete tu ngan kos modified tu hampir sama jerrr betul tak En. Azmi.

 
























Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (28)
3a.

UNTUK DIJUAL: Mini Austin Clubman

Posted by: "Azmi OilyMan" mr.oilyman@gmail.com   oilymantech

Tue Oct 13, 2009 8:23 pm (PDT)

[Attachment(s) from Azmi OilyMan included below]

Mini Austin Clubman (1000cc)
Tahun: 1977

Baru cat luar
Rims 12" Japan & Yokohama A539 : 165' 12 '60
Interior carpet baru
Ada wheel arch - side mirror - ROVER MINI
Disc depan + brake servo
Roadtax till OCT2010

Lokasi: Puchong

Price RM9,800 nego

------
Azmi Abdullah
OILYMAN TECHNOLOGY
Shah Alam, Selangor, MALAYSIA
Tel: +60192764645 or +60176930306
E-Mail: azmi@oilyman.com.my
Web: www.oilyman.com.my
Video: http://www.youtube.com/user/mienyak
Forum: http://oilyman.com.my/forum
WE SUPPLY BEST QUALITY OF ENGINE CARBON CLEANER (DECARBONIZER)

Attachment(s) from Azmi OilyMan

3 of 3 Photo(s)

Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (3)
3b.

Re: UNTUK DIJUAL: Mini Austin Clubman [3 Attachments]

Posted by: "riXal" irief2@yahoo.com   irief2

Tue Oct 13, 2009 10:50 pm (PDT)




ishh kalu ade duit ni da lama aku rembat neh :)

________________________________
From: Azmi OilyMan <mr.oilyman@gmail.com>
To: group krerta <automobil@yahoogroups.com>
Sent: Tue, October 13, 2009 8:20:00 PM
Subject:www.auto.pdniaga.com - UNTUK DIJUAL: Mini Austin Clubman [3 Attachments]

[Attachment(s) from Azmi OilyMan included below]

Mini Austin Clubman (1000cc)
Tahun: 1977

Baru cat luar

Rims 12" Japan & Yokohama A539 : 165' 12 '60
Interior carpet baru
Ada wheel arch - side mirror - ROVER MINI
Disc depan + brake servoRoadtax till OCT2010

Lokasi: Puchong

Price RM9,800 nego
------
Azmi Abdullah
OILYMAN TECHNOLOGY
Shah Alam, Selangor, MALAYSIA
Tel: +60192764645 or +60176930306
E-Mail: azmi@oilyman. com.my
Web: www.oilyman. com.my
Video: http://www.youtube. com/user/ mienyak
Forum: http://oilyman. com.my/forum
WE SUPPLY BEST QUALITY OF ENGINE CARBON CLEANER (DECARBONIZER)

Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (3)
3c.

Re: UNTUK DIJUAL: Mini Austin Clubman

Posted by: "Jemix Mr" jemix_8606@yahoo.com   jemix_8606

Wed Oct 14, 2009 6:50 am (PDT)



XDER PIC KER......?
KETA NIE BWK JALAN2 TOWN MMG GEREK....TP KENA CR GENG CLUB DL....

________________________________
From: riXal <irief2@yahoo.com>
To: automobil@yahoogroups.com
Sent: Wed, October 14, 2009 1:39:03 PM
Subject:Re: www.auto.pdniaga.com - UNTUK DIJUAL: Mini Austin Clubman

ishh kalu ade duit ni da lama aku rembat neh :)

________________________________
From: Azmi OilyMan <mr.oilyman@gmail. com>
To: group krerta <automobil@yahoogrou ps.com>
Sent: Tue, October 13, 2009 8:20:00 PM
Subject:www.auto.pdniaga. com - UNTUK DIJUAL: Mini Austin Clubman [3 Attachments]

Mini Austin Clubman (1000cc)
Tahun: 1977

Baru cat luar

Rims 12" Japan & Yokohama A539 : 165' 12 '60
Interior carpet baru
Ada wheel arch - side mirror - ROVER MINI
Disc depan + brake servoRoadtax till OCT2010

Lokasi: Puchong

Price RM9,800 nego
------
Azmi Abdullah
OILYMAN TECHNOLOGY
Shah Alam, Selangor, MALAYSIA
Tel: +60192764645 or +60176930306
E-Mail: azmi@oilyman. com.my
Web: www.oilyman. com.my
Video: http://www.youtube. com/user/ mienyak
Forum: http://oilyman. com.my/forum
WE SUPPLY BEST QUALITY OF ENGINE CARBON CLEANER (DECARBONIZER)

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (3)
4a.

Nak Sewa MPV

Posted by: "Harris Bin Haron" Harris@maa.com.my

Wed Oct 14, 2009 3:41 am (PDT)



Salam....

Saya ingin bertanya kepada sesiapa yang ada menyediakan perkhidmatan
sewa MPV.

Boleh la bagi no tepon....

Terima kasih...

H
MAAB
LCM

DISCLAIMER:-

This email is confidential and intended only for the use of the
individual or entity named above and may contain information that
is privileged.

If you are not the intended recipient, you are notified that any
dissemination, distribution or copying of this email is strictly prohibited.
If you have received this email in error, please notify us immediately by return email or telephone and destroy the original message.

Thank you.
Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (2)
4b.

Re: Nak Sewa MPV

Posted by: "Joy Runner" shab792@yahoo.com   shab792

Wed Oct 14, 2009 9:51 am (PDT)



Tuan try contact En.Hanif - 019-6622 002

________________________________
From: Harris Bin Haron <Harris@maa.com.my>
To: automobil@yahoogroups.com
Sent: Wed, October 14, 2009 2:52:05 PM
Subject: www.auto.pdniaga.com - Nak Sewa MPV

 
Salam….
 
Saya ingin bertanya kepada sesiapa yang ada menyediakan perkhidmatan sewa MPV.
 
Boleh la bagi no tepon….
 
Terima kasih…
 
H
MAAB
LCM
 DISCLAIMER:- This email is confidential and intended only for the use of the individual or entity named above and may contain information that is privileged. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email or telephone and destroy the original message. Thank you.

Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (2)
5.

Beware when using Kerinchi Link

Posted by: "Azmi OilyMan" mr.oilyman@gmail.com   oilymantech

Wed Oct 14, 2009 9:51 am (PDT)



*Please beware when using Kerinchi Link.*
(Fwd from mybenz forum)

This is a real accident which happened.

Dear Friends,
I had an accident at Kerinchi link yesterday at 630am, Im fine don�t worry I
just want to warn every1 to avoid this highway especially on WET DAY!
Well, I was suppose to meet up some friends for a waterfall trip. So I was
coming from RTM building, going towards to Damansara, I know there is a
curve so I try to press on the brake to slow down a little. But I still lost
control at the dangerous curve, the road was wet and just too slippery. See
below photo, when I drove on this curve, my car got skidded and my tyre hit
the right divider (bang!) Then I saw this wira which had the same accident
before me, so I tried to avoid it and controlled my steering driving to the
left, I kept trying to press on my car brake but my car just lost control,
my god! After that, my car tyre hit the left divider (another big �bang�!)
and it jus stopped and cant move at all, engine was still working.

After I get down from my car and crossed over to the right divider, 1
motorcyclist skidded and fell from his motor bike, everyone screamed at him,
asking him to get up quickly before any car come and hit him L L L My heart
nearly fell out! Huh����.. Then another car got skidded and hit the
dividers, so I know how my car got skidded and hit the divider. In total I
saw 3 cars and 2 motorbikes had the same accident with my own eyes, real
scary, before me, another 3 cars had experienced the same accident! GOSH!!!
1 kancil lady said she only drive 60 per km!

I scream every time when I see any vehicle skidded and hit the divider,
almost every car got skidded! Some so lucky because they were driving very
slow or their car has good traction control feature, so jus skidded without
hitting the dividers, must be slower than 60 per km I guess! GOSH! The 1st
photo was taken at abt 645am.

Please don�t use that highway ON WET day, 2 of my friends were driving
slowly at the same curve but their car got skidded too! But thank god they
didn�t hit the divider. I was on average speed as I know this dangerous
curve and I use this highway quite often but never on a wet day. L
Another fren told that his fren had the same experience few month ago, same
curve on a wet day too!

Well, this is such a bad road condition! And I had to pay RM300 road
compound! How can I complain about Kerinchi link??? I will spread this via
facebook too! Can I write a letter to the star??? Im doing it for those car
who drove slowly but still had the accidents! No motorcyclist escaped!! None
of them! I only saw 2 motorbikes and both skidded and motorcyclists fell
down in the middle of the road! How dangerous!

Dangerous curve that you can�t see what is happening in front of the road

I saw this CRV car in the workshop just now, the poor lady owner had the
same accident, same spot as me, at 5am ++ yesterday, now she is in the hosp
and she hurt her back bone L pray that she will recover very soon! I urge u
guys to ban this highway, PLEASE! Kerinchi link is such a irresponsible
highway management co.! This must be a known issue long ago right? What are
they thinking about? Luckily I didn�t drive that fast right? I did slow down
(u hv to believe me L ) as I know where is the curve!

Please urge ur friend and family to avoid this highway, especially on WET
DAY!
------
Azmi Abdullah
OILYMAN TECHNOLOGY
Shah Alam, Selangor, MALAYSIA
Tel: +60192764645 or +60176930306
E-Mail: azmi@oilyman.com.my
Web: www.oilyman.com.my
Video: http://www.youtube.com/user/mienyak
Forum: http://oilyman.com.my/forum
WE SUPPLY BEST QUALITY OF ENGINE CARBON CLEANER (DECARBONIZER)
Back to top
Reply to sender | Reply to group | Reply via web post
Messages in this topic (1)
Recent Activity
Visit Your Group
Yahoo! Search

Start Searching

Find everything

you're looking for.

Group Charity

Food Bank

Feeding America

in tough times

Yahoo! Groups

Mom Power

Just for moms

Join the discussion

Need to Reply?

Click one of the "Reply" links to respond to a specific message in the Daily Digest.

Create New Topic | Visit Your Group on the Web
Senarai Web:
�      Kad Kahwin - http://www.kadkahwin.biz     
�      Pengiklanan PERCUMA - http://www.interniaga.com     
�      Kad Nama Online - http://www.kadnama.com     
�      Koleksi Lirik Lagu - http://www.liriklagu.interniaga.com      
�      Blog, Video & MP3 - http://www.pdniaga.multiply.com 
�      Kad IPC Shopping - http://www.empay4u.com
�      PD Niaga Blog - http://pdniaga-blog.blogspot.com
�      Jana Iklan � http://www.janaiklan.com

Senarai Group & Keahlian Melalui Email:
1.  automobil-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/automobil 
2.  HitZ-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/HitZ
3.  pdniaga-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/pdniaga 
4.  dunia-politik-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/dunia-politik 
5.  bolasepak-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/bolasepak 
6.  auto-chat-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/auto-chat 
7.  ArenaPC-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/ArenaPC 
8.  pd-net-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/pd-net 
9.  interniaga-subscribe@yahoogroups.com 
http://groups.yahoo.com/group/interniaga
10. EBuku2-subscribe@yahoogroups.com   
http://groups.yahoo.com/group/EBuku2U
10. JanaIklan-subscribe@yahoogroups.com   
http://groups.yahoo.com/group/JanaIklan

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)